Product Description:
RC 1/12 VW BEETLE BUG PEOPLES CAR
SCALE RC MODEL WITH HIGHEST DETAIL
4WD - 2WD SHIFT TRANSMISSION FROM RADIO
INTERIOR, EXTERIOR, ENGINE, LED LIGHTS, SUSPENSION
ARRIVES 100% ASSEMBLED W/ EVERYTHING INCLUDED
INCLUDES RADIO, BATTERY, CHARGER
READY TO RUN, CHARGE AND PLAY
1:12 The People's Car RTR Gray. The Boxer air-cooled engine is the core of the car, the engine crankshaft flywheel is connected by a belt to drive the generator and the cooling fan as well. The semi-circular fan fairing is a major feature, in which the airflow is distributed to the cylinders on both sides. All is faithfully restored on the model, meaning you can observe the blades rotating through the fan intake when the motor is running. We designed a 2-speed shift to simulate the speed of the 1st and 3rd gears of the real car. The power crosses over from the top of the rear axle differential and then returns to the rear axle. The model shares the same structure as the real engine, with the benefit of compactness, making it easy to switch between 4WD and RWD modes. This shift function is perfectly reproduced on the model to provide more driving pleasure when driving off-road.
Features
- -Four-wheel independent suspension
- -Rear portal axles
- -Front and rear axle planetary gear differentials
- -Perfect restoration of Air-cooled horizontally opposed -four-cylinder engine
- -130 motor in the cylinder
- -Cooling fan driven by belt
- -The third channel for the two-speed transmission controls
- -The fourth channel for switching between 4WD-RWD Mode
- -Servo Operated Steering Wheel and Front Wheels
- -Open doors with spring loaded latch
- -Realistic fabric soft rubber seats
- -Open front storage compartment hatch
- -Open Engine hatch
- -Excellent light function
- -Realistic tires, wheels and spare tire
- -Perfect for 1/12 figures
- -30 stainless steel ball bearings
- -Full metal gears
- -Full metal drive shaft
- -4CH 2.4GHz digital proportional remote control system
- -3-in-1 Receiver with ESC and LED light controller
What's in Box
1 x 1:12 The People's Car RTR Gray
1 x 2.4G Transmitter
1 x 3-in-1 Receiver (installed)
1 x 130 Brushed Motor (installed)
3 x 9g Servo (installed)
1 x 2S 7.4V 380mAh Battery
1 x USB Charger
1 x Hex Wrench Socket
1 x Product Manual
Specification
- Length: 339mm
- Width: 139mm
- Height: 139mm
- Wheels: D:58mm , W:12mm
- Wheel base: 202mm
- Ground Clearance: 28mm
- Departure angle: 26°
- Approach angle: 31°
- Motor: 130 Brushed motor
- Battery : 2S Lipo 7.4V 380mAh x1
- Max Speed: 8km/h
- Remote control distance: 60m
- Approx. operating duration time: 20mins
- Remote control: 2.4G Transmitter + 3-in-1 Receiver with ESC and LED light group control board
- Key functions: Two-speed transmission / 4WD-RWD Mode / Smart light effect
Need to Complete:
4 x AAA Batteries for Transmitter
