Product Description:
RC 1/10 Truck Chevy K10 BLAZER 4X4 *RTR*
NEWEST DESIGN PACKED WITH CHASSIS PERFORMANCE
AMAZING SCALE LOOKS, HIGH QUALITY FINISH MODEL
ARRIVES 100% ASSEMBLED W/ RADIO INSTALLED
REQUIRES BATTERY + CHARGER
-W/ 2-SPEED TRANSMISSION W/ DIG FUNCTION
-550 MOTOR 21 TURN 3S LIPO READY
-FRONT + REAR HEADLIGHT SYSTEM
-2WD + 4WD FWD OR RWD OPTIONS FROM RADIO
-ADJUSTABLE DRAG BRAKE FOR DOWNHILL RUNNING
-DIFF LOCK FUNCTION FROM RADIO
-PORTAL AXLES W/ METAL INTERNALS
-COUNTER ROTATING TRANSMISSION OUTPUTS
-MID ENGINE LOW MOUNTED 550 MOTOR
-CLIP LESS MAGNETIC BODY MOUNTING SYSTEM
-AXLE MOUNTED SERVO
Licensed by General Motors, this 1/10 scale model of the Chevrolet K5 BLAZER, produced by FMS Models, features the FCX10 simulation crawler chassis, faithfully replicating the original vehicle's off-road performance. The FCX10 K5 is FMS's first high-performance 1/10 scale simulation crawler. It incorporates an abundant range of features, including DIG, switchable 2WD/4WD, lockable front and rear differentials, two-speed transmission, portal axles, and more.
CHASSIS FEATURES
-METAL C CHANNEL RAILS
-OIL FILLED SHOCK ABSORBERS
-METAL LINKS TRAILING ARMS
-METAL GEARS THROUGHOUT
-FULL BALL BEARINGS
-WATERPROOF METAL GEAR SERVO
-METAL SERVO HORN
-METAL SKID PLATE
-550 21T BRUSH MOTOR
OFFICIALLY AUTHORIZED REALISM
1. Authenticated by General Motors, the FMS K5 boasts a realistic car shell replicating the 1970s American hard road style. 2. FMS introduces a PC material soft shell, combining lightness, impact resistance, and fine texture.
1. Authenticated by General Motors, the FMS K5 boasts a realistic car shell replicating the 1970s American hard road style. 2. FMS introduces a PC material soft shell, combining lightness, impact resistance, and fine texture.
TWO SPEED TRANSMISSION
The FCX10 K5 is equipped with a two-speed gearbox featuring metal gears and a metal shift servo. Controlled through the transmitteer, it allows for seamless switch of sped output modes, catering to the demands of both low-speed climbing and high-speed driving game play.
The FCX10 K5 is equipped with a two-speed gearbox featuring metal gears and a metal shift servo. Controlled through the transmitteer, it allows for seamless switch of sped output modes, catering to the demands of both low-speed climbing and high-speed driving game play.
550 BRUSHED MOTOR 21T & WIDE BATTERY COMPATIBILITY
1. The 550T brushed motor delivers higher power output, adaptability to various terrains, and increased maximum speed. 2. Accommodate various 2-3S lithium batteries with an easily flipped-back or "quickly removed" battery compartment for centralized electronic device access.
1. The 550T brushed motor delivers higher power output, adaptability to various terrains, and increased maximum speed. 2. Accommodate various 2-3S lithium batteries with an easily flipped-back or "quickly removed" battery compartment for centralized electronic device access.
PRE-INSTALLED LIGHTS AND INNOVATION
Pre-installed lights, including headlights, turn signals, and reversing lights, with technological innovation like a magnetic suction interface and remote control one-key wake-up.
Pre-installed lights, including headlights, turn signals, and reversing lights, with technological innovation like a magnetic suction interface and remote control one-key wake-up.
DIG TRANSMISSION SYSTEM
The FCX10 K5 is equipped with a rear axle DIG, allowing for the locking of the rear axle and simultaneous front-wheel drive. This feature provides the vehicle with a smaller turning radius, enabling a 'tank turn' maneuver.
The FCX10 K5 is equipped with a rear axle DIG, allowing for the locking of the rear axle and simultaneous front-wheel drive. This feature provides the vehicle with a smaller turning radius, enabling a 'tank turn' maneuver.
2WD/4WD SWITCH
The FCX10 K5 features a 2WD/4WD switch function, allowing for power output transmissions among DIG/4WD/front-wheel frive or rear-wheel drive/4WD/front-wheel drive (please refer to the manual for more adjustments).
The FCX10 K5 features a 2WD/4WD switch function, allowing for power output transmissions among DIG/4WD/front-wheel frive or rear-wheel drive/4WD/front-wheel drive (please refer to the manual for more adjustments).
NEW 2.4GHZ 11-CHANNEL REMOTE CONTROL SYSTEM
The remote control system allows flexible channel settings and personalized control functions.
The remote control system allows flexible channel settings and personalized control functions.
PORTAL AXLE STRUCTURE
The vehicle is equipped with a portal axle configuration, providing a higher ground clearance for improved off-road capability.
The vehicle is equipped with a portal axle configuration, providing a higher ground clearance for improved off-road capability.
DIFFERENTIAL LOCK FUNCTION
The FCX10 K5 is equipped with front and rear differential lock functions, allowing for convenient switch controlled by an independent channel on the transmitter.
The FCX10 K5 is equipped with front and rear differential lock functions, allowing for convenient switch controlled by an independent channel on the transmitter.
Specification:
Car Size: 548×249×285mm
Wheelbase: 324mm
Approach Angle: 58°
Departure Angle: 48°
Ground Clearance: 89mm
Motor: 21T 550 Brushed motor
Remote control distance: 150m
What's in the Box:
1 x 1:10 Chevrolet K5 RS
1 x Transmitter Receiver Set
1 x 60A ESC(installed)
1 x 21T 550 Brushed motor (installed)
1 x 25KG Servo For Steering Wheel (installed)
4 x 13g Metal Gear Servo (installed)
1 x Product Manual
Need to Complete:
1. 4 x AA Batteries for Transmitter
2. Battery for car (Recommended 2S 5000mAh, Battery Compartment 140 x 47 x 40mm)
3. Please note that whether you use 2S or 3S batteries, you need to use them with the protection cable that provided by FMS.
