Product Description:
The cases of WT162 and WT120 are made of pure brass material and can be used directly as balance weight servos.
When WT162 and WT120 are used in a simulated crawler frame designed with a servo on the beam, the weight on the beam can be heavier and the posture of the whole car can be better.
When WT162 and WT120 are used in a competition performance crawler frame designed with a servo on the bridge, the weight on the bridge can be higher and the crawling performance can be better.
Both WT162 and WT120 use brushless motors and support the Flysky RC Model i-BUS2 protocol. The servo status can be directly observed on the Flysky RC Model NB4 series radio in real time, and the servo parameters can be programmed on the radio.
WT80 and WT85 use aluminum heat sink case, and the servos on various crawler frames have strong torque and speed, and the performance is also excellent.
WT series servos are all made of steel gears, IP67 waterproof, durable, and can be used in various environments; they perform well on 1/10 and 1/8 simulation crawlers and competition crawlers.
Torque(7.4V): 42.0 kg-cm / (583.3 oz/in)
Torque(8.4V): 50.0 kg-cm / (694.4 oz/in)
Speed: 0.11 sec (6.0V) │ 0.09 sec (7.4V)
Speed: 0.08 sec (8.4V)
Operating Voltage: 6.0 ~ 8.4 DC Volts
Weight: 120 g (4.23 oz)
Bearing Type: Ball Bearing x 2
Motor Type: Brushless Motor
Gear Type: Steel
Operating Temperature: -10℃~60℃
Working frequency: 1520μs / 50 ~1500hz
Size: 41.0 x 20.0 x 29.0 mm ( 1.61 x 0.79 x 1.14 in)
Compatible with ibus2 and program box
